BRIEF DESCRIPTION OF EQUIPMENT:
A truck with cone penetrometer built in.There is a growing awareness within the geotechnical and environmental community that cone penetrometer technology (CPT) offers the fastest and most economical way to characterize the subsurface conditions of most sites. CPT probes provide a continuous profile of the underlying site stratigraphy, and when combined with environmental probes and field or lab analysis of CPT-extracted soil, water, and gas samples, can provide a detailed three-dimensional view of any subsurface environmental contamination.
CAPABILITIES OF THE EQUIPMENT :
Features
- Piezocones provide continuous profile of soil stratigraphy and properties of soil layers.
- Fuel-Fluorescence Detector provides a means of detecting contamination in soil layers.
- Soil Sampler is used to collect soil samples at any depth.
- Water Sampler is used to collect fluid samples at any depth.
- Ground-Penetrating 100-MHz Radar is used for Cross-Hole Tomography.
- Soil-Moisture Probe provides continuous in-situ measurement of soil moisture at any depth.
Applications:
- Establish improved continuous stratigraphic logging of the subsurface
- Evaluate the subsurface conditions quickly between two soil boreholes
- Locate the groundwater table & bedrock
- Locate thin weak soil layers
- Locate shear failure zones
- Detect anomalies in the subsurface
- Evaluate in-situ relative density, effective angle of friction, and constrained modulus for granular soils
- Evaluate in-situ undrained shear strength, constrained modulus, and hydraulic conductivity for fine-grained soils
- Obtain soil density and moisture profiles across the subsurface
- Detect contaminants in the subsurface
Specifications:
- The Truck has a push frame capable of exerting more than 25 tons of pushing or pulling load on cone rods.
- The Hydraulic Cone Rod Clamp is capable of gripping cone rods of 1.4?1.75 inches in diameter.
- Hydraulic cone circuit is capable of 28 gpm at 3000 psi.
- The system has the capability of penetrating down to 200 feet.
- A 6-inch coring drill is available as a peripheral.
- The unit has the capability of generating up to 7500 W of electrical power.
- The system has an Automatic Seismic Hammer.
- The Data Acquisition System includes Real-Time Display and Analysis Software.
- Data from Geophones and Shear Hammer can be used to calculate shear modulus, Young's modulus, and Poisson's ratio vs. depth
TRAINING/TECHNICAL HELP AVAILABLE OR REQUIRED TO USE EQUIPMENT?
The equipment must be operated by qualified ORITE staff.
FEES FOR USE OF EQUIPMENT?
Contact Russ Professor Shad Sargand .or Research Engineer Issam Khoury
WEBSITE LINK FOR FACILITY/EQUIPMENT:
NA
Revised 04/25/23