�define Create a new data file? (y/n)n open filename: ross90.dat Ross yoke drive engine configuration Ross yoke drive engine data summary: yoke length b1 (1/2 yoke base) 35.4 [mm] yoke height b2 35.4 [mm] crank radius 8.5 [mm] compression piston diameter 55.9 [mm] expansion piston diameter 55.9 [mm] comp clearence,swept vols 8.0, 61.0 [cm^3] exp clearence,swept vols 10.0, 61.0 [cm^3] ymin = 2.2(cm), ymax = 4.7(cm) alpha = 95.6(degrees) slots heat exchanger cooler data summary: void volume(cc) 33.02 free flow area (cm^2) 0.07 wetted area (cm^2) 14.41 hydraulic diameter(mm) 0.92 cooler length (cm) 4.83 annular regenerator housing wrapped foil matrix unrolled foil length: 6.075(m) foil thickness 0.070(mm) hydraulic diam 0.337(mm) total wetted area 0.427437(sq.m) void volume 35.97(cc) porosity 0.708 slots heat exchanger heater data summary: void volume(cc) 28.40 free flow area (cm^2) 0.08 wetted area (cm^2) 7.52 hydraulic diameter(mm) 1.51 heater length (cm) 3.79 gas type is air operating parameters: mean pressure (kPa): 200.000 cold sink temperature (K): 300.0 hot source temperature (K): 923.0 effective regenerator temperature (K): 554.3 operating frequency (herz): 50.0 pressure phase angle beta 18.5(degrees) total mass of gas: 0.253(gm) ===================== Schmidt analysis =============== Work(joules) 3.535e+00, Power(watts) 1.768e+02 Qexp(joules) 5.237e+00, Qcom(joules) -1.702e+00 indicated efficiency 0.675 ======================================================== Do you want Schmidt analysis plots y)es or n)o: y Do you want particle mass distribution plot y)es or n)o: y �