Search within:

History of the Edwards Accelerator Laboratory

The original Radiation Lab was equipped with a 150-kV Cockroft-Walton accelerator manufactured by the Texas Nuclear Corporation. This laboratory was housed in the old Dailey garage on Richland Avenue near where the new 682 bypass is now located. This photo is taken from the proposal submitted to the U.S. Atomic Energy Commission to fund the tandem accelerator.
The original Radiation Lab was equipped with a 150-kV Cockroft-Walton accelerator manufactured by the Texas Nuclear Corporation. This laboratory was housed in the old Dailey garage on Richland Avenue near where the new 682 bypass is now located. This photo is taken from the proposal submitted to the U.S. Atomic Energy Commission to fund the tandem accelerator.

Nuclear physics at Ohio University was started in 1962 with the hiring of Professor Roger Finlay. The initial research program utilized a small 150-kV Cockroft-Walton accelerator for generating neutrons that was located in an old automobile garage. The Department of Physics, however, had more ambitious plans. Construction of the Ohio University Accelerator Laboratory (OUAL) began in 1965 and was completed in 1967, with funds supplied by the state of Ohio. In addition, Clippinger Laboratories, which houses the rest of the Department of Physics and several other science departments, was completed nearby on campus in 1967. Additional faculty hires in the area of nuclear physics also took place during this time period.

The ground-breaking ceremony for Accelerator Laboratory time of flight tunnel in 1980.
A flyer for the ground-breaking ceremony for Clippinger and the Ohio University Accelerator Laboratory that was held on July 19, 1965. This photo is from the Ohio University archives.
February 1966: the laboratory was just a hole in the ground at this point. Clippinger is under construction in the background. This photo is from the Ohio University archives.
February 1966: the laboratory was just a hole in the ground at this point. Clippinger is under construction in the background. This photo is from the Ohio University archives.

The purchase of the 4.5-MV tandem accelerator was funded by a $1 million dollar grant awarded by the U.S. Atomic Energy Commission to Ohio University in 1967. The principal investigator was Professor Ray Lane, who had been recently hired. The accelerator was manufactured by the High Voltage Engineering Corporation located in Burlington, Massachusetts. The machine was designed to deliver high currents and consists of a unique "T" configuration, with the charging system running vertically and the beam horizontally. The accelerator itself took 18 months to manufacture and over 10 months to install, with the first experiments starting in 1971. Interestingly, the only other accelerator of this design was also installed in "Athens" —at the National Centre for Scientific Research "Demokritos" in Athens, Greece — and it too is still in operation

Construction of the Ohio University Accelerator Laboratory on June 1, 1966. Note the extra-thick concrete walls used to provide radiation shielding for the target rooms and accelerator vault. This photo is taken from the proposal submitted to the U.S. Atomic Energy Commission to fund the tandem accelerator.
Construction of the Ohio University Accelerator Laboratory on June 1, 1966. Note the extra-thick concrete walls used to provide radiation shielding for the target rooms and accelerator vault. This photo is taken from the proposal submitted to the U.S. Atomic Energy Commission to fund the tandem accelerator.
Construction of the Ohio University Accelerator Laboratory on October 11, 1966.
Construction of the Ohio University Accelerator Laboratory on October 11, 1966.

The initial research program was focused on nuclear structure, with a particular emphasis on experimental techniques involving neutrons. Funding was largely provided by the Atomic Energy Commission (now known as the Department of Energy) and the National Science Foundation. Scientists in the laboratory have always opportunistically sought out new research areas, particularly when the unique capabilities of the accelerator could be leveraged.

The Ohio University Accelerator Laboratory on May 1, 1967. The construction is nearly complete. This photo is taken from a proposal submitted to the National Science Foundation seeking to enhance the Department of Physics.
The Ohio University Accelerator Laboratory on May 1, 1967. The construction is nearly complete. This photo is taken from a proposal submitted to the National Science Foundation seeking to enhance the Department of Physics.
The accelerator tank, arriving on campus.
The accelerator tank, arriving on campus.
Maneuvering the Edwards Accelerator tank into position.
Maneuvering the Edwards Accelerator tank into position.
Roger Finlay, observing the process, a very exciting time for him.
Roger Finlay, observing the process, a very exciting time for him.
Lowering the bottom of the tank -- the base of the "T" -- into position.
It was necessary to break away some of the brand new concrete in order to fit the tank into the building.
It was necessary to break away some of the brand new concrete in order to fit the tank into the building.

The laboratory was eventually named the John E. Edwards Accelerator Laboratory, in honor of John E. Edwards, who was a stalwart professor in the Department of Physics from 1932 until 1972, served as Department Chair, and was a recipient of Ohio University′s Distinguished Professor Award. The lab is still also referred to by many via the original acronym OUAL.

Starting in 1978, the laboratory began to direct some efforts towards the investigation of new methods for cancer treatment, in collaboration with the Ohio University College of Osteopathic Medicine. The idea behind this research was that radiotherapy with neutron beams may be superior to conventional X-ray and Cobalt therapy in the treatment of certain types of cancer. More recent projects in medical physics have involved collaborations with researchers from Ohio State University and Massachusetts Institute of Technology to provide fundamental data for boron neutron capture therapy.

The ion source area in the low-energy part of the vault, in the early days. This photo is taken from a proposal submitted to the U.S. Atomic Energy Commission in 1973 to fund research in the laboratory.
The ion source area in the low-energy part of the vault, in the early days. This photo is taken from a proposal submitted to the U.S. Atomic Energy Commission in 1973 to fund research in the laboratory.
The high-energy part of the vault in the early days. This photo is taken from a proposal submitted to the U.S. Atomic Energy Commission in 1973 to fund research in the laboratory.
The high-energy part of the vault in the early days. This photo is taken from a proposal submitted to the U.S. Atomic Energy Commission in 1973 to fund research in the laboratory.
The small target room in the early days. This photo is taken from a proposal submitted to the U.S. Atomic Energy Commission in 1973 to fund research in the laboratory.
The small target room in the early days. This photo is taken from a proposal submitted to the U.S. Atomic Energy Commission in 1973 to fund research in the laboratory.
The large target room in the early days. This photo is taken from a proposal submitted to the U.S. Atomic Energy Commission in 1973 to fund research in the laboratory.
The large target room in the early days. This photo is taken from a proposal submitted to the U.S. Atomic Energy Commission in 1973 to fund research in the laboratory.
The control room in the early days.
The control room in the early days.
Roger Finlay, Jacobo Rapaport, and Steve Grimes, sitting on top of the newly-installed magnetic quadrupole triplet spectrometer in the large target room in the spring of 1979. Senior Honors Tutorial College student Jerry Weber is standing the foreground, asking the faculty for recommendation letters to graduate school.
Roger Finlay, Jacobo Rapaport, and Steve Grimes, sitting on top of the newly-installed magnetic quadrupole triplet spectrometer in the large target room in the spring of 1979. Senior Honors Tutorial College student Jerry Weber is standing the foreground, asking the faculty for recommendation letters to graduate school.

In 1980, the first architectural change in the building was made since its construction in 1967. A 30-meter-long time-of-flight tunnel was constructed underground in the vacant land just east of the building, utilizing funds from the Ohio University 1804 fund, the Department of Energy, and the National Science Foundation. A rotating beam-swinger magnet supplied by Michigan State University was also installed. The combination of  beam swinger and tunnel  allows neutrons to be studied as a function of angle with very well-shielded detectors. The long flight path provides for excellent neutron energy resolution.

A flier commemorating the completion of the neutron time-of-flight tunnel, from the groundbreaking on Aug. 18 to tunnel in place on Sept. 10, 1980.
A flier commemorating the completion of the neutron time-of-flight tunnel.

In 1987, an interdisciplinary program in Condensed Matter and Surface Science was started at Ohio University. This program led to a faculty hire with research specialization in accelerator-based materials studies and the establishment of additional research capabilities in the accelerator laboratory. The W.M. Keck Thin Film Analysis Facility integrates several techniques within a suite of coupled UHV chambers to provide analysis and preparation facilities for research on surfaces and thin films. Accelerator-based probes include Rutherford Backscattering Spectroscopy, Nuclear Reaction Analysis, Elastic Recoil Spectroscopy, Proton-Induced X-Ray Emission, and Ion Channeling.

Looking down the new neutron time-of-flight tunnel.
Looking down the new neutron time-of-flight tunnel.
Beam swinger in the Edwards Accelerator Laboratory, with accelerator in the background
The newly-installed beam swinger magnet.
The beam swinger magnet was designed by Aaron Galonsky at Michigan State University for use at their accelerator. After several years of operation, it could no longer be used at their facility due to an increase in their beam energy. It thus became available for our use at the Ohio University Accelerator Lab. This photo of the plaque on the magnet was taken in 2005, by which time the swinger had inadvertantly
The beam swinger magnet was designed by Aaron Galonsky at Michigan State University for use at their accelerator. After several years of operation, it could no longer be used at their facility due to an increase in their beam energy. It thus became available for our use at the Ohio University Accelerator Lab. This photo of the plaque on the magnet was taken in 2005, by which time the swinger had inadvertantly "swung" into something and chipped the plaque.

The Institute of Nuclear and Particle Physics (INPP) was established at Ohio University in 1991 to promote experimental and theoretical research in nuclear physics at the University. In 1994, the Edwards Accelerator building was expanded with the addition of a conference room, an undergraduate laboratory, an electronics shop, and office space. This addition was financed by roughly equal contributions from Ohio University and funds generated by overhead return through the INPP. The Department was renamed the Department of Physics and Astronomy at about this time, to reflect our growing teaching and research interests in astronomy and astrophysics. 

Two computer systems built in the laboratory by Don Carter and his undergraduate assistants Dennis Hunt and Pat Welch. The smaller one, sitting on top, is known as OU-8000, and was used for data acquisition beginning in the mid 1970s. It is described this Nuclear Instruments and Methods article. The larger computer on the bottom is known as OU-32 and came on line a few years later. It was used for data analysis.
Two computer systems were built in the laboratory by Don Carter and his undergraduate assistants Dennis Hunt and Pat Welch. The smaller one, sitting on top, is known as OU-8000, and was used for data acquisition beginning in the mid 1970s. The larger computer on the bottom is known as OU-32 and came on line a few years later. It was used for data analysis. The front panels for both computers were made in the department machine shop by Roger Smith (before the advent of CNC mills!). Both computers were workhorses and served in the laboratory through the mid 1990s.

One of the strengths of the laboratory has always been the design and construction of specialized experimental equipment, including hardware, electrics, and computers. These developments are possible because of our on-campus location, excellent technical staff, and other departmental resources such as our machine shop. The laboratory provides an excellent environment for both undergraduate and graduate students to learn all facets of experimental physics, including design, fabrication, data taking, and analysis. The laboratory infrastructure has also supported the development of equipment for several experiments that have been performed at other laboratories. 

Roger Finlay and Jacobo Rapaport with the swinger in the early 1980s. This photo is from the Ohio University archives.
Roger Finlay and Jacobo Rapaport with the swinger in the early 1980s. This photo is from the Ohio University archives.

Over time, the laboratory has increasingly hosted users from outside universities and laboratories. These users are often drawn here because of our capabilities and expertise in the generation and production of neutrons. One particular example is the development of neutron radiography, which has been led by scientists from Lawrence Livermore National Laboratory.

The Edwards Accelerator Laboratory has sustained a very high level of productivity over the years, with many Ohio University faculty performing a significant fraction of their research here. As of July 2012, Ohio University has produced 76 Ph.D.s in experimental nuclear science, of which 58 involved experimental work performed at at Ohio University. A list of Ph.D. students, their advisors, and thesis topics is given at the end of this page. Four Ohio University faculty who have worked in the laboratory, Roger Finlay, Steve Grimes, Raymond Lane, and Jacobo Rapaport, have received Ohio University′s Distinguished Professor Award. This award is the highest permanent recognition attainable by faculty at Ohio University.

The research focus of the laboratory has continued to evolve over time. Nuclear structure, and in particular statistical properties of nuclei, remains an important research focus. A relative new research area for the lab is nuclear astrophysics, which is concerned with providing an understanding of how nuclear physics impacts astrophysics (e.g., the origin of the elements and energy generation in stars). Applications of nuclear physics are becoming increasingly important. Example applications include high-precision fission measurements (needed to design the next generation of nuclear reactors) and the remote sensing of fissile materials using neutrons and gamma rays (motivated by the desire to prevent the unauthorized transport and or/use of uranium and plutonium).

In 2004 the University recognized the interface between nuclear physics and astrophysics as one of its "Research Priorities," awarding $1.3 million to the "Structure of the Universe" initiative. This initiative has led to increased ties between the nuclear physics and astrophysics groups and enhanced their research programs, including a faculty hire in low-energy experimental nuclear physics and $100,000 for refurbishment of the Edwards Accelerator Laboratory.

With the assistance of a $321,000 grant from the National Science Foundation, the accelerator was upgraded to a Pelletron charging system provided by the National Electrostatics Corporation. This upgrade replaced the aging charging belt system and was completed in January 2012. The new system has demonstrated considerably improved terminal stability, has allowed operation at higher terminal voltages, and is expected to reduce required maintenance time and expense.

In January 2020, commissioning was completed on a new Alphatross helium ion source obtained from National Electrostatics Corporation using $187,000 from a National Science Foundation Major Research Instrumentation grant. This upgrade replaced the duoplasmatron ion source that had been operation since the accelerator lab's beginning. The new source delivers higher beam intensities, shorter start-up time, and more stable operation.

Ground breaking for the expansion of the John E. Edwards Accelerator Laboratory in 1993. People visible from left to right include Louis Wright, Lloyd Chestnut, David Ingram, Jacobo Rapaport, David Onley, Roger Finlay (with shovel), Jim Dilley, Charlotte Elster, and Chuck Brient.
Ground breaking for the expansion of the John E. Edwards Accelerator Laboratory in 1993. People visible from left to right include Louis Wright, Lloyd Chestnut, David Ingram, Jacobo Rapaport, David Onley, Roger Finlay (with shovel), Jim Dilley, Charlotte Elster, and Chuck Brient.
Expansion underway, 1993. Construction was completed in early 1994.
Expansion underway, 1993. Construction was completed in early 1994.
The view inside the accelerator tank, looking up along the vertical coumn. The
The view inside the accelerator tank, looking up along the vertical coumn. The "T" structure of the columns is clearly evident. This photo appeared in Spring 2004 issue of Ohio Today.
Carl Brune and Catalin Matei at the high-energy end of the machine. This photo appeared in Spring 2004 issue of Ohio Today.
Carl Brune and Catalin Matei at the high-energy end of the machine. This photo appeared in Spring 2004 issue of Ohio Today.
Sadly, Roger Finlay passed away on March 13, 2011. The conference room in the Edwards Accelerator Lab was subsequently named the Roger W. Finlay Conference Room in his honor. This large photo from the ground breaking ceremony for the expansion of the Edwards Accelerator Lab now hangs in the conference room.
Sadly, Roger Finlay passed away on March 13, 2011. The conference room in the Edwards Accelerator Lab was subsequently named the Roger W. Finlay Conference Room in his honor. This large photo from the ground breaking ceremony for the expansion of the Edwards Accelerator Lab now hangs in the conference room.
Steve Grimes, Ernst Breitenberger, Louis Wright, Harold Knox, Chuck Brient, and Ray Lane, immediately following Harold′s colloquium presented to the Department of Physics and Astronomy on April 22, 2011. Harold received his Ph.D. from Ohio University in 1972 under the supervision of Roger Finlay. After his Ph.D., Harold worked at Rensselaer Polytechnic Institute and Texas A&M before returning to Ohio University as a postdoctoral Fellow. Since 1989 he worked for the Knolls Atomic Power Laboratory.
Steve Grimes, Ernst Breitenberger, Louis Wright, Harold Knox, Chuck Brient, and Ray Lane, immediately following Harold′s colloquium presented to the Department of Physics and Astronomy on April 22, 2011. Harold received his Ph.D. from Ohio University in 1972 under the supervision of Roger Finlay. After his Ph.D., Harold worked at Rensselaer Polytechnic Institute and Texas A&M before returning to Ohio University as a postdoctoral Fellow. Since 1989 he worked for the Knolls Atomic Power Laboratory. Harold passed away a little over a year later, on July 15, 2012.
The accelerator control room on October 20, 2011. The terminal voltage is being regulated by the new Terminal Potential Stabilizer provided by the National Electrostatics Corporation. The unit is sitting on the cart in the foreground. This was the first part of the Pelletron upgrade project. The machine was still utilizing the old belt charging system at this time.
The accelerator control room on Oct. 20, 2011. The terminal voltage is being regulated by the new Terminal Potential Stabilizer provided by the National Electrostatics Corporation. The unit is sitting on the cart in the foreground. This was the first part of the Pelletron upgrade project. The machine was still utilizing the old belt charging system at this time.
The new Terminal Potential Stabilizer and Charging Controller, installed in the control panel on December 15, 2011.
The new Terminal Potential Stabilizer and Charging Controller, installed in the control panel on Dec. 15, 2011.
The chain drive motors and pulleys, awaiting installation, on December 15, 2011.
The chain drive motors and pulleys, awaiting installation, on Dec. 15, 2011.
Some of the installed chains and pulleys on January 17, 2012. Our system utilizes three chains, running vertically. The Pelletron charging system was sucessfully tested at 1 MV terminal voltage on January 24, 2012, and at 4 MV a few days later. Photo by Devon Jacobs.
Some of the installed chains and pulleys on January 17, 2012. Our system utilizes three chains, running vertically. The Pelletron charging system was sucessfully tested at 1 MV terminal voltage on January 24, 2012, and at 4 MV a few days later. Photo by Devon Jacobs.
Accelerator Engineer Devon Jacobs with the Alphatross in October 2019, following installation. The first plasma was achieved the following week. Photo by Don Carter.
Accelerator Engineer Devon Jacobs with the Alphatross in October 2019, following installation. The first plasma was achieved the following week. Photo by Don Carter.
First plasma achieved with the Alphatross. November 2019. Photo by Don Carter.
First plasma achieved with the Alphatross. November 2019. Photo by Don Carter.

Experimental Nuclear Science Ph.D. Graduates

This list of experimental nuclear science Ph.D. graduates from Ohio University includes students who utilized the tandem accelerator for materials science purposes, as well as three students who conducted theoretical research that are included for completeness (two advised by Grimes and one by Finlay). It should also be noted that there were several experimental high-energy physics Ph.D.s in the department in the pre-1975 era who are not included.

Name | Year | Advisor | Thesis

  • Gula Hamad | 2022 | Meisel | Measurements of the 96 Zr(α,n) and 65 Cu(α,n) Cross Sections at Edwards Accelerator Laboratory for Astrophysics and Applications
  • Joseph A. Rowley | 2022 | Hicks | Improved Λp Elastic Scattering Cross Sections Between 0.9 and 2.0 GeV/c and Connections to the Neutron Stars
  • Shiv Subedi | 2021 | Meisel | Investigating and Reducing the Impact of Reaction Rate Uncertainties on 44 Ti and 56 Ni Production in Shock Driven Nucleosynthesis of Core Collapse Supernovae
  • Ustav Shrestha | 2021 | Hicks | Photoproduction of Λ* Resonances using the CLAS Detector
  • Doug Soltesz | 2021 | Meisel | Use of ( 3 He,n) Reactions to Constrain Nuclear Reaction Rates in the Hydrogen and Helium Burning Environments of Type-I X-ray Bursts
  • Som Paneru | 2020 | Brune | Elastic Scattering of 3 He+ 4 He with SONIK
  • Bishnu Karki | 2020 | Roche | Deep Exclusive π 0 Electroproduction Measured in Hall A at Jefferson Lab with the Upgraded CEB
  • Taya Chetry | 2019 | Hicks | A Study of the Reaction γd→ π + π - d (From Vector Mesons to Possible Dibaryons)
  • Rekam Giri | 2019 | Brune | Cross Section Measurements of the 12 C (α,γ) 16 O Reaction at E c.m. =3.7, 4.0, and 4.2 MeV
  • Abinash Pun | 2019 | Frantz | Measurements of Di-Jet π 0 -h ± Correlations in Light-Heavy Ion Collisions at RHIC-PHENIX
  • Tyler Danley | 2018 | Frantz | Photon-Related Elliptic Azimuthal Asymmetry and Photon-Hadron Correlations with an Isolation Cut in Au+Au Collisions at √s NN = 200 GeV at RHIC-PHENIX
  • Mongi Dlamini | 2018 | Roche | Measurement of Hard Exclusive Electroproduction of π 0 Meson Cross Section in Hall A of JLab with CEBAF at 12 GeV
  • Nadyah Alanazi | 2018 | Voinov | Studying the Fusion Evaporation Reaction (α,n) with 54 Fe, 56 Fe, 57 Fe, and 58 Fe
  • Andrea Richard | 2018 | Crawford | Spectroscopy of the A = 33 Isobars in the Island of Inversion
  • Nicholas Compton | 2017 | Hicks | The Differential Cross Section and Λ Recoil Polarization from γd → K 0 Λ(p)
  • Sushil Dhakal | 2016 | Brune | Study of DD Neutrons and their Transmission in Iron
  • Cody E. Parker | 2016 | Brune | The 3 H(d,γ) Reaction and the 3 H(d,γ)/ 3 H(d,n) Branching Ratio for E c.m. ≤300 keV
  • Shamim Akhtar | 2016 | Brune | Study of the 12 C (α,γ) 16 O Reaction via the α-Transfer Reactions: 12 C( 6 Li,d) 16 O and 12 C( 7 Li,t) 16 O
  • Shloka K. Chandavar | 2015 | Hicks | Photoproduction of scalar mesons using the CEBAF Large Acceptance Spectrometer (CLAS)
  • Bing Xia | 2014 | Frantz | Neutral Pion - Charged Hadron Jet Correlations in d+Au Collisions at 200 GeV
  • Anthony Paul Ramirez | 2014 | Voinov | Study of nuclear level density from deuteron induced reactions on iron and copper isotopes
  • Nowo Riveli | 2014 | Frantz | Direct Photon - Hadron Correlations Measurement in Au+Au Collision at Nucleon Center-Of-Mass Energy of 200 GeV With Isolation Cut Methods
  • Dilupama A. Divaratne | 2014 | Brune | One and Two Neutron Removal Cross Sections of 24 O via Projectile Fragmentation
  • Youngshin Byun | 2013 | Grimes / Voinov | Study of nuclear level density and gamma-strength function in 90 Zr, 196 Pt, and 197 Pt
  • Kevin W. Cooper | 2013 | Ingram | Characterization of diamond like carbon thin films fabricated by unbalanced magnetron sputtering under ultra-high vacuum conditions
  • Buddhini Waidyawansa | 2013 | Roche | A 3% Measurement of the Beam Normal Single Spin Asymmetry in Forward Angle Elastic Electron-Proton Scattering using the Qweak Setup
  • Rakitha Beminiwattha | 2013 | Roche | A Measurement of the Weak Charge of the Proton through Parity Violating Electron Scattering using the Qweak Apparatus: A 21% Result
  • Wei Tang | 2012 | Hicks | Photoproduction of K *+ Λ/Σ 0 and K 0 Σ + from the proton Using CLAS at Jefferson Lab
  • Daniel Sayre | 2011 | Brune | Measurement of the 2.68-MeV resonance interference and R-matrix analysis of the 12 C (α,γ) 16 O reaction
  • Dustin Keller | 2010 | Hicks | U-spin symmetry test of the Σ *+ electromagnetic decay
  • Babatunde Oginni | 2009 | Grimes | Study of nuclear level densities from evaporation of compound nuclei of mass numbers 61, 64, 65, and 82
  • Aderemi Adekola | 2009 | Brune | Proton-transfer study of unbound 19 Ne via the 2 H( 18 F,α) 15 O reaction
  • Shaleen Shukla | 2008 | Grimes | Calculation of nuclear level densities near the drip lines
  • Serdar Kizilgul | 2008 | Hicks | Study of pion photo-production using a TPC detector to determine beam asymmetries from polarized HD
  • Catalin Matei | 2006 | Brune | Nucleosynthesis of 16 O under quiescent helium burning
  • Ishaq Hleiqawi | 2006 | Hicks | K *0 photoproduction and electroproduction measured at CLAS
  • Christopher Bade | 2006 | Hicks | RF methods to increase deuteron polarization in HD targets and NMR spin-polarization analysis at LEGS
  • Yannis Parpottas | 2004 | Grimes | Astrophysically important states in 18 Ne and 26 Si studied with the ( 3 He,n) reaction
  • Glen MacLachlan | 2004 | Opper | The ratio of electric and magnetic proton form factors at Q 2 =1.13 (GeV/c) 2 via recoil polarimetry
  • Americo Salas Bacci | 2003 | Grimes | Level densities of 28 Si, 46 Ti, 52 Cr and 60 Ni from Ericson fluctuations
  • Asghar Kayani | 2003 | Ingram | Deposition and characterization of diamond-like carbon films with and without hydrogen and nitrogen
  • Eugen Trifan | 2003 | Ingram | Study of the early stages of growth and epitaxy of GaN thin films on sapphire
  • Raymond Wheeler | 2002 | Grimes | Nuclear spectroscopy using charged particles
  • James Oldendick | 2002 | Grimes | Low energy reaction modes of 6 Li and 10 B on 27 Al
  • Yixiu Kang | 2002 | Ingram | Deposition and Characterization of Amorphous GaN Thin Films
  • Xiaochun Wang | 2001 | Rapaport | The 13 C (p⃗,n⃗) 13 N reaction: spin observable measurements at 200 MeV
  • Diane Reitzner | 2001 | Opper | Charge symmetry breaking in np→dπ0 close to threshold
  • Po-Lin Huang | 1998 | Grimes | The study of the role of the two-body force in determining level densities
  • Cheri Hautala | 1998 | Rapaport | Measurement of polarization observables in the quasielastic region on natCa and natPb using the (p⃗,n⃗) reaction at 200 MeV
  • Saleh-Ibra Al-Quraishi | 1997 | Grimes | Analysis of reaction modes of low energy reactions of deuterons with 56 Fe and 27 Al nuclei
  • Michael Maldei | 1997 | Ingram/Gulino | A study of the suitability of amorphous, hydrogenated carbon (a-C:H) for photovoltaic devices
  • Soon-Cheon Seo | 1996 | Ingram | The characterization of diamond-like carbon films deposited using unbalanced magnetron sputtering
  • Joel Keay | 1996 | Ingram | Hydrogen analysis of diamond-like carbon using MeV ion beams
  • Rodney Michael | 1995 | Hicks | K+-nucleus elastic scattering at 715 and 635 MeV/c
  • Hong Zhang | 1995 | Hicks | Proton compton scattering and π-production with polarized photons
  • Chi Tang | 1995 | Ingram | A design of experiment study of the nucleation of chemical vapor deposited diamond films
  • Werner Abfalterer | 1995 | Finlay | Level widths and level densities of nuclei in the 32≤A≤60 mass region inferred from fluctuation analysis of total neutron cross sections
  • Fred Bateman | 1994 | Grimes | A study of the 29 Si level density from 3 to 22 MeV
  • James Guillemette | 1994 | Grimes | A study of the higher excitation levels in 14 C via the 10 Be(α,n0) 13 C reaction in the 2.5 MeV ≤ Eα ≤8.5 MeV energy range
  • Xun Yang | 1994 | Rapaport | Dipole and spin dipole resonances observed in charge exchange reaction on p-shell nuclei at intermediate energies
  • Lian Wang | 1993 | Rapaport | The 10 B(p,n) 10 C reaction and quasifree scattering on p-shell nuclei at 186 MeV
  • Henry Clark | 1993 | Hicks | Nuclear decay following deep-inelastic scattering at 500 GeV
  • Earl Saito | 1993 | Lane | Level study of 14 C via neutron scattering to the unbound levels of 13 C
  • Vivek Mishra | 1992 | Grimes | Level density of 57 Co in the energy region 1 MeV to 14 MeV
  • Brent Park | 1991 | Rapaport | Energy dependence of Gamow-Teller and dipole strength distribution in A = 32 and A = 40 nuclei via (n,p) reactions
  • Nourredine Boukharouba | 1991 | Grimes | Low-energy optical model studies on 54 Fe and 56 Fe
  • Yun Wang | 1988 | Rapaport | Nuclear structure studies with monoenergetic neutrons: zirconium isotopes
  • Rupak Das | 1988 | Finlay | Unified description of the n+ 209 Bi mean field between 20 MeV to 60 MeV via the dispersion relation
  • Edward Sadowski | 1988 | Lane | A study of the higher excitation levels of 11 B via the 10 B(n,n) 10 B and 10 B(n,n′) 10 B*(0.72, 1.74, 2.15, 3.59, 4.77 MeV) reactions
  • Sharad Saraf | 1988 | Grimes | Multi-step compound nuclear reactions induced by 8.0 to 14.8 MeV neutrons on 54 Fe and 56 Fe with comparison to equilibrium and pre-equilibrium models
  • Paul Egun | 1987 | Brient | The study of proton transfer reactions and their application to nuclear level counting via the reactions 23 Na, 28 Si, 32 S(d,n)
  • Dau Wang | 1987 | Rapaport | Nucleon induced reactions on p-shell nuclei
  • David Resler | 1987 | Lane | Structure of 14 C via elastic and inelastic neutron scattering from 13 C: measurement, R-matrix analysis, and shell model calculations
  • Hirannaiah Satyanarayana | 1986 | Grimes | Level densities of 26 Al, 27 Al, and 28 Si studied with the (d,n) reaction
  • Md. Saiful Islam | 1985 | Finlay | Elastic and inelastic scattering of nucleons from 16O
  • Ricardo Alarcon | 1985 | Rapaport | Elastic and inelastic scattering of low energy nucleons from 28 Si, 32 S, 34 S and 40 Ca
  • Steven Graham | 1985 | Grimes | Neutron-induced charged particle reactions on 58 Ni and 60 Ni with comparision to statistical model calculations
  • Ali Soleimani Meigooni | 1984 | Finlay | Nucleon-induced excitation of collective bands in 12 C and the application to neutron dosimetry at En>20 MeV
  • Paul Koehler | 1984 | Lane | Structure of 19O from measurement and R-matrix analysis of σ(θ) for 18 O(n,n′) 18 O*(1.98 MeV)
  • Steve Mellema | 1983 | Finlay | Microscopic and collective model analysis of nucleon scattering from 54,56 Fe
  • Rajendra Kurup | 1983 | Finlay | The isospin and strong coupling effects near shell closing
  • Ramesh Tailor | 1983 | Rapaport | Neutron scattering from s-d shell nuclei
  • Vivek Kulkarni | 1981 | Rapaport | Study of neutron-deuteron reactions using a magnetic quadrupole triplet spectrometer
  • Mohammed Mirzaa | 1978 | Rapaport | Neutron scattering on even isotopes of tin
  • Mohammad Hadi Hadizadeh-Yazdi | 1978 | Finlay | Isospin dependence of nuclear deformations
  • Roger White | 1977 | Lane | A study of the higher excitation states of 12 B via the 11 B(n,n) 11 B reaction
  • David Bainum | 1977 | Finlay | Neutron inelastic scattering from closed-shell nuclei
  • Kumaroth Devan | 1976 | Brient | Low-lying states of 104 Ag and 106 Ag
  • Tarlok Cheema | 1976 | Rapaport | Energy dependence of the nucleon-nucleus optical potential via neutron scattering
  • Juan Ferrer | 1975 | Rapaport | Neutron elastic scattering at 11 MeV and the isospin dependence of the nucleon-nucleus optical potential
  • Gabriel Doukellis | 1975 | Rapaport | Multilevel multichannel study of the structure of 27 Al at excitation energies between 13.0 and 15.0 MeV
  • Charles Nelson | 1973 | Lane | A study of the structure of 12B via elastic scattering of neutrons from 11 B
  • Siegfried Hausladen | 1973 | Lane | A study of the structure of 11 B from elastic scattering of neutrons from 10 B
  • John Lemming | 1972 | Finlay | Polarization and angular distribution of neutrons emitted from the 18 O(p,n) 18 F reaction at proton energies between 3.00 and 3.50 MeV
  • Harold Knox | 1972 | Finlay | Differential cross section and polarization of 2.63 MeV neutrons scattered from 12 C
  • John Cox | 1972 | Lane | Differential cross section and polarization for neutrons scattered from 10 B at 2.63 MeV
  • Gene Stoppenhagen | 1968 | Finlay | Polarization of the neutrons produced in the D(d,n) 3 He reaction at low deuteron bombarding energies
  • Michael Gilpatrick | 1967 | Finlay | Angular correlation of inelastically scattered neutrons and the associated gamma rays from carbon 12 at En=14.65 MeV
  • Paul Beach | 1966 | Finlay | Elastic scattering of 14.1 MeV neutrons from nitrogen, oxygen, and argon
  • Albert Frasca | 1965 | Finlay | Elastic scattering of 14 MeV neutrons from carbon, boron, potassium, and calcium
  • Tran Trong Gien | 1965 | Finlay | Relativistic formulation of the lifetime matrix in collision theory
  • Douglas Humphrey | 1965 | Finlay | The angular distribution of neutrons inelastically scattered from the 0.48 MeV level of 7 Li
  • William Gettys | 1964 | Finlay | Inelastic nucleon scattering and the shell model
  • Richard Castle | 1963 | Finlay | Measurement of the circular polarization of the 1.28 MeV gamma ray following the beta decay of Europium 154

We are also aware of several additional Ph.D. theses from other institutions that were based in part upon research carried out at the Edwards Accelerator Laboratory:

  • Nilendu Gupta, 1995, Ohio State University, Biomedical Engineering, supervised by Thomas E. Blue, "Fabrication and preliminary testing of a moderator assembly for an accelerator-based neutron source for boron neutron capture therapy"
  • William Howard, 1997, Massachusetts Institute of Technology, Department of Physics, supervised by Jacquelyn Yanch, "Accelerator-based boron neutron capture therapy"
  • Whitney Raas, 2007, Massachusetts Institute of Technology, Department of Nuclear Science and Engineering, supervised by Richard Lanza, "Towards the development of an explosives detection system using neutron resonance radiography"
  • Panagiotis Gastis, 2020, Central Michigan University, Department of Physics, supervised by George Perdikakis, "Towards constraining the key nuclear reactions in neutrino-p process nucleosynthesis"
  • Bryan J. Vande Kolk, 2020, University of Notre Dame, Department of Physics, supervised by Michael C. Wiescher, ′Cross section measurements of 10 B(p,α) 7 Be′
  • Evan Bray, 2020, Pennsylvania State University, Department of Astronomy and Astrophysics, supervised by David N. Burrows, ′Characterizing x-ray hybrid CMOS detectors for future x-ray space telescopes′
View Site in Mobile | Classic
Share by: