Accelerator Control and Monitor Computer Startup Instructions.
Make sure that the firewall is up and running. If not, reboot the firewall and wait until it is up.
Reboot the computers at the console (tandem.oual.ohiou.edu and control1.oual.ohiou.edu).
While the computers are rebooting, power cycle the 3 HP34980A located
1) in the control room over the radiation monitor
2) in the small target on the overhead cable tray
3) at the sputter source
if possible.
After both computers are running login to control1 user "carter" using the usual lab default password.
Issue the command "startx" on computer control1.oual.ohiou.edu.
Click on the "start_tandem" icon on the desktop. This should start all of the control and monitoring applications.
If the monitoring system still isn't working properly, the previously saved data may be corrupt. You can archive and clear the previously saved logging data by clicking on the "Carefull+" button and selecting the "ClearDeviceLogs" then again click on the "Carefull+" button and select "RestartAll". If this doesn't restore operation there may be a network problem or edwards1.phy.ohiou.edu may need attention.
